Image Width (pixels):
| Analyzed File | buckleFEA v6 |
| Version | Autodesk Fusion 360 (2.0.4126) |
| Creation Date | 2018-05-28, 14:19:28 |
| Author | andreshu |
Project Properties
Title Studies Author andreshu
Simulation Model 1:1
Study Type Static Stress Last Modification Date 2018-05-26, 10:45:10
Contact Tolerance 0.1 mm Remove Rigid Body Modes No
Average Element Size (% of model size) Solids 6 Scale Mesh Size Per Part No Average Element Size (absolute value) - Element Order Parabolic Create Curved Mesh Elements No Max. Turn Angle on Curves (Deg.) 60 Max. Adjacent Mesh Size Ratio 1.5 Max. Aspect Ratio 10 Minimum Element Size (% of average size) 20
Number of Refinement Steps 0 Results Convergence Tolerance (%) 20 Portion of Elements to Refine (%) 10 Results for Baseline Accuracy Von Mises Stress
Component Material Safety Factor Component1:1 Nylon 6 Yield Strength
Density 1.12E-06 kg / mm^3 Young's Modulus 2758 MPa Poisson's Ratio 0.35 Yield Strength 70.4 MPa Ultimate Tensile Strength 75.7 MPa Thermal Conductivity 2.81E-04 W / (mm C) Thermal Expansion Coefficient 9.53E-05 / C Specific Heat 1670 J / (kg C)
Type Nodes Elements Solids 9604 4876
Name Minimum Maximum Safety Factor Safety Factor (Per Body) 3.08 15 Stress Von Mises 3.471E-07 MPa 22.85 MPa 1st Principal -5.121 MPa 24.2 MPa 3rd Principal -22.73 MPa 1.925 MPa Normal XX -10.99 MPa 10.01 MPa Normal YY -7.861 MPa 4.948 MPa Normal ZZ -22.63 MPa 24 MPa Shear XY -1.901 MPa 1.627 MPa Shear YZ -2.636 MPa 2.789 MPa Shear ZX -4.905 MPa 8.16 MPa Displacement Total 0 mm 6.4 mm X -6.399 mm 0.317 mm Y -0.009387 mm 0.02426 mm Z -0.6999 mm 1.686 mm Reaction Force Total 0 N 5.178 N X -2.904 N 1.536 N Y -1.219 N 1.238 N Z -2.137 N 4.642 N Strain Equivalent 2.122E-10 0.00964 1st Principal 3.06E-11 0.008709 3rd Principal -0.01017 -8.263E-11 Normal XX -0.003731 0.003502 Normal YY -0.002415 0.002372 Normal ZZ -0.007517 0.008307 Shear XY -0.001861 0.001593 Shear YZ -0.00258 0.002731 Shear ZX -0.004802 0.007988
0
8
[MPa] 0
22.85
[MPa] -5.12
[MPa] -22.73
[mm] 0
Image Width (pixels):
